A Mainspring company - serving Canyon Lake, TX

Before & After Gallery - Mainspring Garage Door Co.

Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

Your new garage door for as low as $59/month*on approved credit; ask for current terms

You get a price before we start. It does not change when the truck arrives.

Styles & brands we work with

Raised-panel steel
Raised-panel steel
Carriage house
Carriage house
Modern flush
Modern flush
Full-view glass
Full-view glass
LiftMaster openers
LiftMaster openers
Chamberlain openers
Chamberlain openers

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Garage Door Before & After in Canyon Lake, TX

We’ve been fixing and replacing garage doors around Canyon Lake since 1984. Photos don’t lie. Below you’ll see the kind of work our technicians handle every week, from rusted-out coastal hardware to doors that haven’t opened right since the last big Hill Country freeze. If your door looks anything like these “before” shots, we can get it sorted.

Call (210) 399-7195

Recent Transformations

Rusted Torsion Spring Failure on a 20-Year Clopay Door

Broken and rusted torsion spring on a Clopay garage door in Canyon Lake
Before: snapped torsion spring with visible rust corrosion
New torsion spring installed on same Clopay garage door
After: new galvanized spring, balanced and tested

The homeowner near Canyon Lake Dam called at 6:30 a.m. when their door wouldn’t budge. We found a torsion spring that had been rusting in the humidity off the lake for years, finally snapping clean through. Our technician swapped in a new galvanized spring, adjusted the cable tension, and balanced the door so it stays put at half-mast. Done in one visit. The door’s quieter now than it was five years ago.

Dented Amarr Panel Replacement After a Backing Incident

Crushed lower panel on an Amarr garage door in Canyon Lake
Before: crushed bottom section from a backing accident
Matching replacement panel installed on Amarr garage door
After: factory-matched panel, color and embossing aligned

A customer in Startzville backed into their door pulling out for an early fishing trip. The bottom panel was toast, but the frame and hardware were solid. Rather than selling a whole new door, we sourced a matching Amarr panel in the original sandstone color. Carl Dutton checked the track alignment himself; a tweaked vertical track would’ve chewed up the new panel in six months. Door looks factory-fresh and the homeowner kept their money in their pocket.

Wayne Dalton TorqueMaster Conversion to Standard Torsion System

Failed Wayne Dalton TorqueMaster spring system in a Canyon Lake garage
Before: enclosed TorqueMaster tube with broken internal spring
Converted standard torsion spring system on same door
After: open standard torsion system, serviceable for decades

Wayne Dalton’s TorqueMaster system hides the spring inside a steel tube. Looks neat until it breaks, and then you’re stuck because most shops won’t touch it. We get these calls monthly around Canyon Lake. This one was in Hancock: spring snapped, tube was seized, door was dead weight. We converted it to a standard torsion setup with a new spring, cables, and drums. Now any competent tech can service it, and the homeowner knows exactly what they’re looking at when they glance up.

Full Clopay Canyon Ridge Collection Install on a New Build

Empty garage door opening on new construction near Canyon Lake
Before: rough opening on a new home build, no door installed
Installed Clopay Canyon Ridge carriage house door with windows
After: insulated carriage house door with decorative hardware

A builder in Sattler needed a door that wouldn’t look cheap against stone veneer and a metal roof. We measured twice, ordered a Clopay Canyon Ridge with insulated steel backing and faux-wood overlay, then hung it with a LiftMaster 84501 belt drive. The windows match the home’s grille pattern. We were back once to tweak the travel limits after the framing settled, no charge. That’s the 90-Day Done Right Promise in action.

Genie Screw Drive Opener Swap for a Belt Drive in a Lakeside Home

Noisy Genie screw drive opener mounted in a Canyon Lake garage
Before: rattling Genie screw drive, original to a 1998 build
Quiet Chamberlain belt drive opener installed in same location
After: Chamberlain belt drive, wall-mounted control, battery backup

Screw drive openers don’t love Hill Country dust, and this one near the Guadalupe River inlet was grinding itself to death. The homeowner’s wife worked nights and the racket woke her every afternoon. We pulled the old Genie, reinforced the header bracket, and hung a Chamberlain belt drive with MyQ and battery backup. Now it purrs. The old door actually works better too; we adjusted the spring tension while we were up there since the previous opener had been fighting it for years.

Emergency Cable Replacement on a Double-Wide Door After a Wind Storm

Frayed and unspooled lift cable on a heavy double garage door
Before: frayed cable unspooled from drum, door hanging crooked
New cables wound properly on drums, door level and secure
After: matched cables, proper tension, door level and safe

A spring storm with 50-mph gusts caught a double-wide door in Cranes Mill while it was half-open. The wind slammed it down, popped a cable off the drum, and left the door hanging like a broken jaw. We got the call at 9 p.m., dispatched a truck, and found the second cable frayed halfway through. Replaced both, inspected the springs for stress fracturing, reset the opener force limits. The door’s 16 feet wide and heavy; a single cable failure on that span is dangerous. We made sure it won’t happen again.

Want Results Like These?

Every job above was quoted upfront, finished in one trip, and backed by our written 90-Day Done Right Promise. If your garage door in Canyon Lake is making noise, hanging crooked, or not moving at all, call (210) 399-7195. A live person answers, day or night, and we’ll give you a straight answer about whether it needs a tweak, a part, or a full replacement. Estimates are free. The price we state is the price on the bill.

Written by Carl Dutton, Owner at Mainspring Garage Door Co., serving Canyon Lake since 1984.

Need Garage Door help in Canyon Lake? Licensed & insured · within the hour response · free estimates
Call (210) 399-7195
Local Service Coverage

Request a Free Estimate in Canyon Lake

Tell us what you need - Mainspring Garage Door Co. responds fast. No obligation.

By providing your information above, you agree to our Privacy Policy and agree to be contacted by phone, email, or text about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Us
Call Now - 24/7 Dispatch